Chapter 1
30
Receiving faxes in Continue
Mode (MFC-1810, MFC-1811
and MFC-1815 only) 1
The machine can store received faxes in the
memory if you choose Continue mode when
the LCD shows Replace Toner. When
received faxes are printed in Continue mode
the LCD will ask if the print quality of the fax
is OK. If the quality is not good, choose 2.No.
The machine will keep the faxes stored in the
memory so you can reprint them after you
replace the toner cartridge with a new one. If
the print quality is good, choose 1.Yes. The
LCD will ask if you want to delete the printed
faxes from the memory. If you choose not to
delete them, you will be asked again after you
replace the toner cartridge with a new one.
If you turn off the machine, faxes stored in
the memory will be lost.
To Next Page
Loading...
Need help?
General