Brother MFC-1815 - Printer; Machine Info

Chapter 1
26
3.Printer 1
4.Machine Info 1
4.ID Copy
(Continued)
3.Contrast -nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
Press a to increase
the contrast or press
b to decrease the
contrast.
4.2in1/1in1 2in1* Allows you to use the
2 in 1 (ID) Copy key
as a double- sided
copy.
50
1in1 Allows you to use the
2 in 1 (ID) Copy key
as a one-sided copy.
51
3.Printer
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
1.Print
Options
1.Test Print Prints a test page. —
2.Auto
Continue
— If this setting is
enabled, the machine
will automatically
clear a paper size
error, and will use the
paper loaded in the
paper tray.
On*
Off Size mismatch is
displayed on the LCD
and printing does not
occur.
3.Reset
Printer
— Restores the printer
settings to the
original factory
default settings.
a Reset
b Exit
The factory settings are shown in Bold with an asterisk.
4.Machine Info.
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
1.Serial No. — You can check the
serial number of your
machine.
—
2.Version 1.Main
Version
You can check the
firmware version of
your machine.
—
The factory settings are shown in Bold with an asterisk.
2.Copy (continued)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.