Brother MFC-1815 - Printer; Print Reports

Chapter 1
20
4.Printer 1
5.Print Reports 1
4.Printer
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
1.Print
Options
1.Test Print Prints a test page. —
2.Auto
Continue
— If this setting is
enabled, the machine
will automatically
clear a paper size
error, and will use the
paper loaded in the
paper tray.
On*
Off Size mismatch is
displayed on the LCD
and printing does not
occur.
3.Reset
Printer
— Restores the printer
settings to the
original factory
default settings.
1.Reset
2.Exit
The factory settings are shown in Bold with an asterisk.
5.Print Reports
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
1.XMIT Verify 1.View on LCD You can use the
Transmission
Verification Report as
proof that you sent a
fax. This report lists
the receiving party’s
name or fax number,
the time and date of
transmission,
duration of
transmission,
number of pages
sent, and whether or
not the transmission
was successful.
— You can view the
Transmission
Verification Report
for your last 200
outgoing faxes.
2.Print
Report
— Print the last report.
2.Address
Book
1.Numeric Lists names and
numbers stored in
the Speed Dial
memory.
— Print in numerical
order.
2.Alphabetic — Print in alphabetical
order.
The factory settings are shown in Bold with an asterisk.