Brother MFC-1815 - General Setup

General information
11
1
1.General Setup 1
5.Dial Prefix
(for New
Zealand)
6.Dial Prefix
—
Sets a prefix number
that will always be
added before the fax
number every time
you dial.
— Enter the prefix
number (up to 5
digits) on the dial
pad, and then press
OK.
The dial prefix setting
will automatically dial
a predefined number
before every fax
number you dial. For
example: If your
phone system
requires a 9 to dial an
outside number this
setting will
automatically dial 9
for every fax you
send.
6.Reset
(for New
Zealand)
7.Reset
1.Address &
Fax
Restores all stored
phone numbers and
fax settings.
1.Reset
2.Exit Cancel restore and
exit the menu.
2.All
Settings
Restores all the
machine settings to
factory default.
1.Reset
2.Exit Cancel restore and
exit the menu.
1.General Setup
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
1.Mode Timer — You can set how
much time the
machine takes after
the last Copy or Scan
operation to return to
Fax mode.
0 Sec Return to the fax
mode at once.
30 Secs Return to the fax
mode after the time
you choose.
1 Min
2 Mins*
5 Mins
Off The machine will stay
in the mode you used
last.
The factory settings are shown in Bold with an asterisk.
0.Initial Setup (continued)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.