Brother MFC-235C User Manual

98
No Paper Fed The machine is out of paper or
paper is not properly loaded in the
paper tray.
Do one of the following:
 Refill the paper in the paper tray, and then
press Mono Start or Colour Start.
 Remove the paper and load it again and then
press Mono Start or Colour Start.
The paper is jammed in the
machine.
See Printer jam or paper jam on page 100.
No Response/Busy The number you dialed does not
answer or is busy.
Verify the number and try again.
Not Registered You tried to access a Speed Dial
number that is not programmed.
Set up the Speed Dial number. (See Storing
Speed Dial numbers on page 49.)
Out of Memory The machine's memory is full. Fax sending or copy operation in progress
Press Stop/Exit and wait until the other
operations in progress finish and then try again.
Printing operation in progress
Reduce print resolution. (For details, see
Printing for Windows
®
or Printing and Faxing for
Macintosh
®
in the Software User's Guide on the
CD
-ROM.)
Paper Jam Paper is jammed in the machine. Remove the Jam Clear Cover (at the back of the
machine) and pull out the jammed paper. See
Printer jam or paper jam on page 100.
Print Unable XX The machine has a mechanical
problem.
—OR—
A foreign object such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 99 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then
reconnect it.
Scan Unable XX The machine has a mechanical
problem.
—OR—
A foreign object such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 99 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then
reconnect it.
Unusable Device A broken device has been
connected to the USB direct
interface.
Unplug the device from the USB direct interface,
then press Power Save to turn the machine off
and then on again.
Error Message Cause Action

Brother MFC-235C Specifications

General

Print technology	Inkjet
Maximum resolution	6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	25 ppm
Print speed (color, normal quality, A4/US Letter)	20 ppm
Digital sender	No
Number of print cartridges	4
PictBridge	Yes
Scan speed	4 sec/page
Dimensions (WxDxH)	398 x 360 x 150 mm
All-in-one functions	Copy, Fax, Scan
Color all-in-one functions	copy, print, scan
Compatible operating systems	Windows 2000/XP/Vista, Mac OS, Linux
Scan to	E-mail, File, OCR
Scanner type	Flatbed scanner
Grayscale levels	256
Image formats supported	BMP, PNG
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	600 x 2400 DPI
Copier resize	25 - 400 %
Maximum copy resolution	1200 x 1200 DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2
Copy speed (black, normal quality, A4)	18 cpm
Copy speed (color, normal quality, A4)	16 cpm
Faxing	Mono faxing
Fax memory	170 pages
Modem speed	14.4 Kbit/s
Fax coding methods	JPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	40
Total input capacity	100 sheets
Total output capacity	50 sheets
Paper tray media types	Glossy paper, Plain paper, Transparencies
Non-ISO print media sizes	Executive
ISO A-series sizes (A0...A9)	A4, A5, A6
Borderless printing media sizes	A4, A6
Maximum ISO A-series paper size	A4
USB 2.0 ports quantity	1
Bundled software	Brother MFL-Pro Suite, Brother ControlCentre 3, ScanSoft Paperport 11 SE, Brother ControlCentre 2 (Mac), NewSoft Presto! PageManager 7 (Mac)
Power consumption (PowerSave)	5 W
Power consumption (average operating)	21, 7 W
Package weight	10100 g
Market positioning	Home & office