Brother MFC-235C

Dialling and storing numbers
49
8
Storing Speed Dial numbers 8
You can store up to 40 2-digit Speed Dial
locations with a name. When you dial you will
only have to press a few keys (For example:
Speed Dial, OK, #, the two-digit number, and
Mono Start or Colour Start).
a Press Speed Dial and a or b to choose
Set Speed Dial.
Press OK.
b Use the dial pad to enter a 2-digit
Speed Dial location number (01-40).
Press OK.
c Enter the fax or telephone number
(up to 20 digits).
Press OK.
d Do one of the following:
 Enter the name (up to 16 characters)
using the dial pad.
Press OK. (To help you enter letters,
see Entering Text on page 123.)
 To store the number without a name,
press OK.
e Do one of the following:
 To store another Speed Dial
number, go to step b.
 To finish the setting, press
Stop/Exit.
Changing Speed Dial
numbers 8
If you try to store a Speed Dial number where
a number has already been stored, the LCD
will show the name or number that has been
stored there, and will ask you to do one of the
following:
 Press 1 to change the stored number.
#05:MIKE
1.Change 2.Exit
 Press 2 to exit without making a change.
If you chose 1, you will be able to change the
stored number and name, or enter a new one.
Follow the instructions below:
a Enter a new number. Press OK.
b Enter a new name. Press OK.
 To change a character, use d or c to
position the cursor under the character
you want to change, then press
Clear/Back. Re-enter the character.
 To finish the setting, press Stop/Exit.