Making copies
59
10
Adjusting Brightness,
Contrast and Colour 10
Brightness 10
To temporarily change the brightness setting,
follow the instructions below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Copy Options and a or b to
choose Brightness.
Press OK.
-nnonn+ e
e Press a or b to make a lighter or darker
copy. Press OK.
f Press Mono Start or Colour Start.
To change the default setting follow the
instructions below:
a Press Menu, 3, 2.
b Press a or b to make a lighter or darker
copy. Press OK.
c Press Stop/Exit.
Contrast 10
Adjust the contrast to help an image look
sharper and more vivid.
a Press Menu, 3, 3.
3.Contrast
b Press a or b to change the contrast.
Press OK.
c Press Stop/Exit.
Colour saturation 10
a Press Menu, 3, 4.
4.Color Adjust
b Press a or b to choose 1.Red, 2.Green
or 3.Blue. Press OK.
c Press a or b to change the colour
saturation. Press OK.
d Do one of the followings:
Return to b to choose the next
colour.
Press Stop/Exit.
To Next Page
Loading...
