Brother MFC-235C

Making copies
57
10
d Press Copy Options and a or b to
choose Enlarge/Reduce.
Press OK.
e Do one of the following:
 Press a or b to choose the
enlargement or reduction ratio you
want. Press OK.
 Press a or b to choose
Custom(25-400%). Press OK. Use
the dial pad to enter an enlargement
or reduction ratio from 25% to 400%.
(For example, press 5 3 to enter
53%.) Press OK.
f Press Mono Start or Colour Start.
Note
Page Layout Options are not available
with Enlarge/Reduce.
Making N in 1 copies or a
poster 10
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
Important 10
 Please make sure paper size is set to
Letter, Legal or A4.
 You cannot use the Enlarge/Reduce
setting with the N in 1 and Poster features.
 N in 1 colour copies are not available.
 (P) means Portrait and (L) means
Landscape.
 You can only make one poster copy at a
time.
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Copy Options and a or b to
choose Page Layout.
Press OK.
e Press a or b to choose Off(1 in 1),
2in1(P), 2in1(L),
4in1(P), 4in1(L) or
Poster(3 x 3).
Press OK.
f Press Mono Start to scan the
document. You can also press
Colour Start if you are using Poster
layout.
If you are making a poster or placed the
document in the ADF, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to g.
g After the machine scans the page, press
1 to scan the next page.
Next Page?
1.Yes 2.No
h Put the next document on the scanner
glass. Press OK.
Repeat g and h for each page of the
layout.
Set Next Page
Then Press OK
i After all the pages have been scanned,
press 2 to finish.