2-24
Confidential
Error
Codes
Description
Refer
to:
Error
Codes
Description
Refer
to:
BF00
The document scanning position
sensor detected that the document
length was 400 mm or longer and
could not be fed to ADF (double-side
restoration).
2-70
ED00 ---
C001 --- EE00 ---
C002 --- F900
The spec code was not entered
correctly.
2-72
C003 --- FA01 ---
C004 --- FA02 ---
C100 --- FA03 ---
C700
The memory is insufficient to expand
the data of PC-Print.
2-70 FB01 ---
C800
The memory used to store secure print
data exceeded the memory size for
secure print data.
2-70 FB02 ---
C900 --- FB03 ---
CA00 --- FB04 ---
D100
An error occurred while initializing the
modem.
2-70 FB05 ---
D200
Detected that the modem PCB is not
connected.
2-70 FB06 ---
D800
An error occurred while initializing the
touch panel.
2-71 FB07 ---
D900 --- FB08 ---
DA00 --- FB09 ---
DB00 --- FB0A ---
E000
An error occurred in the ROM check
sum.
2-71 FB0B ---
E001 --- FB0C ---
E002 --- FB0D ---
E100 Program error 2-71 FB0E ---
E400 --- FB0F ---
E500
An error occurred during access to the
DRAM in the main PCB ASSY.
2-71 FC01 ---
E600
Write error in the EEPROM of the main
PCB ASSY
2-71 FC02 ---
E701 System error in the flash ROM 2-71 FC03 ---
E702 Read error in the flash ROM 2-71 FC04 ---
E900
An error occurred while initializing the
NFC.
2-72 FC05 ---
EC00 ---
To Next Page
Loading...
Need help?
General
