2-38
Confidential
Print Unable
0B
Turn the power off
and then back on
again.
An error occurred in the high-
voltage power supply PCB
ASSY while operating.
0B01 2-51
An error occurred in the high-
voltage power supply PCB
ASSY when the machine was in
the ready state.
0B02 2-51
Print Unable
2E
Turn the power off
and then back on
again.
Could not communicate with the
cartridge sensor on the machine
side.
2E00 2-51
Print Unable
3A
Turn the power off
and then back on
again.
A communication error occurred
between the controller and
engine in main PCB.
3A00 2-51
Print Unable
A7
Turn the power off
and then back on
again.
Color parameter in the ROM
does not match the first side or
second side CIS.
A700 2-67
Print Unable
D1
Turn the power off
and then back on
again.
An error occurred while
initializing the modem.
D100 2-70
Print Unable
E0
Turn the power off
and then back on
again.
An error occurred in the ROM
check sum.
E000 2-71
Print Unable
E1
Turn the power off
and then back on
again.
Program error
E100 2-71
Print Unable
E5
Turn the power off
and then back on
again.
An error occurred during access
to the DRAM in the main PCB
ASSY.
E500 2-71
Print Unable
E6
Turn the power off
and then back on
again.
Write error in the EEPROM of
the main PCB ASSY
E600 2-71
Print Unable
E7
Turn the power off
and then back on
again.
System error in the flash ROM E701 2-71
Read error in the flash ROM
E702 2-71
Print Unable
E9
Turn the power off
and then back on
again.
An error occurred while
initializing the NFC.
E900 2-72
Print Unable
ZC
Turn the power off
and then back on
again.
Detected that supply power is
unstable. (less than 100 times)
6F00 2-58
Error message
Description
Error
codes
Refer
to:
Upper line Lower line
To Next Page
Loading...
Need help?
General
