2-44
Confidential
20 01 Unable to detect flag field. 4.13.3
20 02 Carrier was OFF for 200 ms or longer. 4.13.3
20 03
Abort detected (“1” in succession for 7 bits or more).
4.13.3
20 04 Overrun detected. 4.13.3
20 05 A frame received for 3 seconds or more. 4.13.3
20 06 CRC error in answerback. 4.13.3
20 07 Echo command received. 4.13.3
20 08 Invalid command received. 4.13.3
20 09
Command ignored in document setting or damping-out at
turn-around transmission.
4.13.3
20 0A T5 time-out error 4.13.3
20 0B CRP received. 4.13.3
20 0C EOR or NULL received. 4.13.3
20 0D
Corresponding command not received although the FIF
command sending bit is ON.
4.13.3
20 0E EOR command received. 4.13.3
20 13
Line disconnected without receiving DCN after receiving
the last page.
(After receiving EOP and sending CFR, received BYE
before receiving DCN.) (T38)
4.13.3
32 01
Remote terminal only with V.29 capability in 2,400 or 4,800
bps transmission.
4.13.3
32 02 Remote terminal not ready for polling. 4.13.3
32 10
Remote terminal not equipped with password function or
its password switch is OFF.
4.13.3
32 11
Remote terminal not equipped with or not ready for
confidential mailbox function.
4.13.3
32 12
Remote terminal not equipped with or not ready for relay
broadcasting function.
4.13.3
32 13 No confidential mail in the remote terminal. 4.13.3
32 14
Available memory space of the remote terminal is less
than that required for reception of confidential mails or
relay broad-casting instruction.
4.13.3
32 15
Remote terminal not equipped with Cipher receiving
function.
4.13.3
32 16 Remote terminal not equipped with SEP function. 4.13.3
32 17 Remote terminal not equipped with SUB function. 4.13.3
32 18 Remote terminal not equipped with color function. 4.13.3
40 02 Illegal coding system requested. 4.13.3
40 03 Illegal recording width requested. 4.13.3
Code 1 Code 2 Cause Refer to:
To Next Page
Loading...
Need help?
General
