Chapter 6
30
Receive mode settings6
Ring Delay 6
The Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode.
a Press Menu, 2, 1, 1.
b Press a or b to choose how many
times the line rings before the machine
answers (02-10 for Australia, 01-10
for New Zealand, 0-10 for some
countries).
Press OK.
If you choose 00, the line will not ring at
all.
c Press Stop/Exit.
F/T Ring Time (Fax/Tel mode
only) 6
If you set the Receive Mode to Fax/Tel, you
need to decide how long the machine will
signal you with its special pseudo/double-ring
when you have a voice call. If it's a fax call,
the machine receives the fax.
This pseudo/double-ring happens after the
initial ringing from the phone company. Only
the machine rings and no other phones on the
same line will ring with the special
pseudo/double-ring. However, you can still
answer the call on any telephone.
a Press Menu, 2, 1, 2.
b Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds for Australia and some
countries, 20, 30, 40 or 55 seconds for
New Zealand).
Press OK.
c Press Stop/Exit.
Note
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.
To Next Page
Loading...
Need help?
General
