Dialling and storing numbers
47
8
Search 8
You can search for names you have stored in
the One-Touch and Speed-Dial memories.
Press Search/Speed Dial and the menu
keys to search numerically or use the dial pad
and then the menu keys to search
alphabetically.
1 To search numerically.
2 To search alphabetically, you can use the
dial pad to enter the first letter of the name
you are looking for.
Fax Redial 8
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Mono Start or Colour Start to try again. If
you want to make a second call to the last
number dialled, you can save time by
pressing Redial/Pause and Mono Start or
Colour Start.
Redial/Pause only works if you dialled from
the control panel.
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.
Storing numbers 8
You can set up your machine to do the
following types of easy dialling: One-Touch,
Speed-Dial and Groups for broadcasting
faxes. When you dial a Quick-Dial number,
the LCD shows the name, if you stored it, or
the number.
Note
If you lose electrical power, the Quick-Dial
numbers that are in the memory will not be
lost because they are stored permanently.
Storing a pause 8
Press Redial/Pause to put a 3.5-second
pause between numbers. If you are dialling
overseas, you can press Redial/Pause as
many times as needed to increase the length
of the pause.
1
2
To Next Page
Loading...
Need help?
General
