Telephone and External devices
45
7
Changing the remote codes 7
If you want to use Remote Activation, you
have to turn on the remote codes. (The
default setting is On) The preset Fax Receive
Code is l 51 (l 91 for New Zealand). The
preset Telephone Answer Code is #51
(#91 for New Zealand). If you want to, you
can replace them with your own codes.
a Press Menu, 2, 1, 4.
1.Setup Receive
4.Remote Codes
b Press a or b to choose On (or Off).
Press OK.
c Enter the new Fax Receive Code.
Press OK.
d Enter the new Telephone Answer Code.
Press OK.
e Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another three-
digit code using the numbers 0-9, l, #.
• Remote Codes might not work with some
telephone systems.
To Next Page
Loading...
Need help?
General
