Brother MFC-490CW

Making copies
81
11
Note
Watermark Copy, Book Copy , Sort
and Enlarge/Reduce are not available
with Page Layout.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Page Layout.
e Press d or c to choose Off(1 in 1),
2in1(P), 2in1(L),
4in1(P), 4in1(L) or
Poster(3x3).
Press OK.
f If you do not want to change additional
settings, press Black Start or
Color Start to scan the page.
If you placed the document in the ADF
or are making a poster, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to step g.
g After the machine scans the page,
press 1 to scan the next page.
h Place the next page on the scanner
glass.
Press OK.
Repeat steps g and h for each page of
the layout.
i After all the pages have been scanned,
press 2 to finish.
Note
If photo paper has been chosen in the
Paper Type setting for N in 1 copies, the
machine will print the images as if Plain
paper had been chosen.
Place the document face down in the
direction shown below:
 2 in 1 (P)
 2 in 1 (L)
 4 in 1 (P)
 4 in 1 (L)
 Poster (3 x 3)
You can make a poster size copy of a
photograph.