36 Chapter 6
6
Advanced Sending
Advanced Operations
Overseas Mode
Sometimes, when sending a fax to overseas numbers, problems can be experienced. This mode
makes the machine work better for such calls.
After you send a fax using this feature, the feature turns itself off.
1
Insert the document face up in the ADF, or face down on the glass platen.
2
Press Menu/Set, 2, 2, 7.
3
Press or to select ON (or OFF), and press Menu/Set when the screen displays your
selection.
4
Press 1 if you want to select additional settings. The display returns to the SETUP SEND
menu—OR—Press 2 if you are finished choosing settings and go to Step 5.
5
Enter the fax number you’re calling, and press Mono Fax Start.
Delayed Transmission (Timer) (Not Available for Colour Fax)
You can use this function to send a fax up to 24 hours later.
1
Insert the document face up in the ADF, or face down on the glass platen.
2
Press Menu/Set, 2, 2, 3.
3
Enter the time you want the fax to be sent, in 24-hour format (for example, enter 19:45 for 7:45
PM), and press Menu/Set.
4
Press 1 if you want to select additional settings. The display returns to the SETUP SEND
menu—OR—Press 2 if you are finished choosing settings and go to Step 5. The screen prompts
you to enter the fax number.
5
Enter the fax number, and press Mono Fax Start. The machine will wait until the time you
have entered to send the fax.
Delayed Batch Transmission
Before sending the delayed faxes, your Brother machine will economize by sorting all the documents
in memory by destination and scheduled time. If you set Batch Transmission to ON, all delayed
faxes scheduled at the same time to the same fax number will be sent as one transmission.
1
Press Menu/Set, 2, 2, 4.
2
Press or to select ON (or OFF), and press Menu/Set.
3
Press Stop/Exit.
To Next Page
Loading...
Need help?
General
