iv
User-Friendly Programming
We have designed your Multi-Function Centre with on-screen programming. User-friendly
programming helps you take full advantage of all the functions the machine has to offer. (See
Using
This Manual
, page iii.)
Since your programming is done on the LCD, we have created step-by-step on-screen prompts to
help you. All you need to do is follow the prompts as they guide you through the function menu
selections, programming options and settings. Additionally, you can program settings more quickly
by pressing
Menu/Set
and the menu number using the dial pad.
A complete list of the function selections, options, and settings that are available is provided at the
beginning of this manual. (See
Menu Mode & Menu Selection Table
, page 12.)
Alternating Displays
The LCD sometimes alternates between the currently
selected option, and a help message giving brief
instructions about how to proceed. The display you will
probably see most often is shown on the right, showing you
that when you place a document in the feeder, you can
either dial a number to send it as a fax or press the
Mono Copy
or
Colour Copy
key to make a copy of the
document.
COPY: NO.& COPY
FAX: NO. & START
To Next Page
Loading...
Need help?
General
