Brother MFC 6890CDW - Setup to Receive Delayed Polling; Sequential Polling (Monochrome Only)

Chapter 10
88
Setup to receive delayed
polling 10
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a Press (Fax).
b Press d or c to display Polling RX.
c Press Polling RX.
d Press Timer.
e Enter the time (in 24-hour format) you
want to start polling.
For example, enter 21:45 for 9:45 PM.
Press OK.
f Enter the fax number you are polling
using One Touch, Phone Book or the
dial pad on the control panel.
g Press Mono Start or Colour Start.
The machine makes the polling call at
the time you entered.
Sequential polling
(Monochrome only) 10
Sequential polling lets you request
documents from several fax machines in one
operation.
a Press (Fax).
b Press d or c to display Polling RX.
c Press Polling RX.
d Press Standard, Secure or Timer.
e Do one of the following:
 If you chose Standard, go to
step f.
 If you chose Secure, enter a four-
digit number, press OK, go to step f.
 If you chose Timer, enter the time
(24-hour format) you want to begin
polling and press OK, go to step f.
f Press d or c to display Broadcasting.
g Press Broadcasting.
h Do one of the following:
 Press Add Number and enter a
number using the buttons on the
LCD.
Press OK.
 Press Phone Book. Press to
choose Alphabetical Order or
Numerical Order. Press a or b to
select a number.
Press OK.
Note
One Touch Dial locations begin with l.
Speed Dial locations begin with #.
i After you have entered all the fax numbers
by repeating steps
h , press OK.