EasyManuals Logo

Brother MFC 6890CDW User Manual

Brother MFC 6890CDW
243 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
Receiving a Fax
61
6
Remote Retrieval 6
You can call your machine from any touch
tone telephone or fax machine, then use the
remote access code and remote commands
to retrieve fax messages.
Setting a Remote Access
Code 6
The remote access code lets you access the
remote retrieval features when you are away
from your machine. Before you can use the
remote access and retrieval features, you
have to set up your own code. The factory
default code is the inactive code (---l).
a Press MENU.
b Press a or b to display Fax.
c Press Fax.
d Press a or b to display
Remote Access.
e Press Remote Access.
f Enter a three-digit code using numbers
0-9, l, or # by pressing the buttons on
the LCD.
Press OK.
(The preset lcannot be changed.)
Note
Do not use the same code as your
Remote Activation Code (l 51 (l 9 1 for
New Zealand)) or Remote Deactivation
Code (#51 (# 9 1 for New Zealand)).
(See Operation from extension
telephones on page 73.)
g Press Stop/Exit.
Note
You can change your code at any time by
entering a new one. If you want to make
your code inactive, press in step f
to restore the inactive setting (---l) and
press OK.
Using your Remote Access
Code 6
a Dial your fax number from a touch tone
telephone or another fax machine.
b When your machine answers, enter
your remote access code (3 digits
followed by ) at once.
c The machine signals if it has received
messages:
1 long beep — Fax messages
No beeps — No messages
d When the machine gives two short
beeps, enter a command.
The machine will hang up if you wait
longer than 30 seconds to enter a
command.
The machine will beep three times if you
enter an invalid command.
e Press 9 0 to stop Remote Access when
you have finished.
f Hang up.
Note
If your machine is set to Manual mode
and you want to use the remote retrieval
features, wait for about 100 seconds after
it starts ringing, and then enter the remote
access code within 30 seconds. This
function may not be available in some
countries e.g. Australia.
Clear

Table of Contents

Other manuals for Brother MFC 6890CDW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC 6890CDW and is the answer not in the manual?

Brother MFC 6890CDW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)35 ppm
Print speed (color, normal quality, A4/US Letter)28 ppm
Digital senderNo
Number of print cartridges4
Scan toE-mail, FTP, USB
Duplex scanningYes
Grayscale levels256
Input color depth48 bit
Image formats supportedBMP, PNG
Copier resize25 - 400 %
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory480 pages
Modem speed33.6 Kbit/s
Total input capacity350 sheets
Total output capacity50 sheets
Display diagonal4.2 \
Market positioningHome & office
Processor familyRISC
Sound pressure level (printing)50 dB
Media weight (tray 1)64 - 220 g/m²
ISO A-series sizes (A0...A9)A3, A4, A5, A6
ISO B-series sizes (B0...B9)B4, B5
Borderless printing media sizesA3, A4, A6
Maximum ISO A-series paper sizeA3
Scan speed4.49 sec/page
Dimensions (WxDxH)540 x 488 x 323 mm
Power requirementsAC 220 -240V, 50/60Hz
Networking features10/100 Base-TX
Wireless technology802.11b/g
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, fax, print, scan
Compatible operating systemsWindows: Vista, 2000 Prof., XP Home Edition/Prof. Edition (32 & 62 bits), Server 2003 (32 & 64 bits), Server 2008. Mac OS X 10.2 & later Linux: for CUPS printing system (x86, x64 environment) Printer & scanner driver
Supported network protocols (IPv4)IPv4: ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), NetBIOS/WINS, LPR/LPD, Custom Raw Port/Port9100, DNS Resolver, mDNS, FTP Server, TELNET, SNMPv1, TFTP, Scanner Port, LLTD, responder, Web Services, SMTP Client, POP before SMTP, SMTP-AUTH, POP3, APOP, FTP Client, LDAP
Standard interfacesUSB 2.0
USB 2.0 ports quantity1
Power consumption (standby)6.4 W
Power consumption (PowerSave)4.5 W
Power consumption (average operating)29 W
Operating relative humidity (H-H)20 - 80 %
Package weight22100 g
Bundled softwareBrother MFL-pro suite in Windows: BrotherControlCentre 3 Scansoft Paperport 11SE + OCR, Macintosh:BrotherControlCentre 2 Newsoft Presto! Page manager 7

Related product manuals