Brother MFC 6890CDW - 8 Dialling and Storing Numbers; How to Dial; Manual Dialling; One Touch Dialling

75
8
8
How to Dial 8
Manual dialling 8
Press all of the digits of the fax or telephone
number using the dial pad.
One Touch Dialling 8
Your machine has 3 One Touch keys where
you can store 6 fax or telephone numbers for
automatic dialling.
Speed Dialling 8
a Press Phone Book.
b Press the two-digit number you want to
call. You can also display the numbers
in alphabetical order by pressing
on LCD.
Note
If the LCD shows Not Registered
when you enter a One Touch or
Speed Dial number, a number has not
been stored at this location.
Fax Redial 8
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Mono Start or Colour Start to try again. If
you want to make a second call to a number
you recently dialled, you can press
Redial/Pause and choose one of the last
30 numbers from the Outgoing Call List.
Redial/Pause only works if you dialled from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial up to three
times at five minute intervals.
a Press Redial/Pause.
b Press the number you want to redial.
c Press Send a fax.
d Press Mono Start or Colour Start.
Note
In Real Time Transmission the automatic
redial feature does not work when using
the scanner glass.
Dialling and storing numbers 8