92
11
How to copy 11
Entering Copy mode 11
When you want to make a copy, press
(Copy) to illuminate it in blue.
The LCD shows:
1 No. of Copies
Press the number box directly and enter the
number you want.
Also you can enter the number of copies by
pressing or on the screen (as shown
above).
Press d or c to scroll through the Copy key
options.
Quality (See page 93.)
Enlarge/Reduce (See page 94.)
Tray Select (See page 98.)
Paper Type (See page 97.)
Paper Size (See page 98.)
Brightness (See page 97.)
Contrast (See page 97.)
Stack/Sort (See page 96.)
Page Layout (See page 95.)
Skew Adjustment (See page 98.)
Book Copy (See page 99.)
Watermark Copy (See page 99.)
Duplex Copy (See page 100.)
Favorite Settings (See page 102.)
Press the option you want.
Note
• The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer
on page 28.)
• Book Copy and Watermark Copy
features are supported by technology
from Reallusion, Inc.
Making a single copy 11
a Press (Copy).
b Load your document.
(See Loading documents on page 24.)
c Press Mono Start for B&W copy or
Colour Start for colour copy.
Making copies 11
Normal
100%
Tray#1
COPY
Quality Tray Select
Favorite
Enlarge/
Reduce
1
To Next Page
Loading...
