Brother MFC-7225N - A Appendix A; Telephone Services; BT Call Sign (for U.K. Only; To Enable the Machine to Work with BT Call Sign (Only with Your External Phone

A - 1
A
Telephone services
BT Call Sign (For U.K. Only)
This machine feature lets you use the BT Call
Sign subscriber service which allows you to
have at least two separate telephone
numbers on one phone line. Each phone
number has its own distinctive ringing
pattern, so you know which phone number is
ringing. This is one way you can have a
separate phone number for your machine.
Your machine has a BT Call Sign compatible
distinctive ringing function, allowing you to
dedicate a second phone number (on the
same phone line) just for receiving faxes.
Note
■
You can switch BT Call Sign off
temporarily, then turn it back on. When
you get a new fax number, make sure you
reset this function. The machine will
automatically answer incoming calls that
use your new fax number.
■
When you set the BT Call Sign feature to
ON, the receive mode is set to
Manual
automatically.
Manual
mode will not
respond to incoming telephone calls,
since the number you use for telephone
calls will use the normal ring pattern.
To enable the machine to work with BT
Call Sign (Only with your external
phone)
1
Press Menu/Set, 2, 0, 2.
The screen displays the current setting
of this feature.
2
Press
▲
or
▼
to select
On
(or
Off
).
3
Press Menu/Set.
4
Press Stop/Exit.
Note
If you turn off BT Call Sign, the receive mode
stays set to
Manual
. You will need to set
receive mode again. (See Choosing the
Receive Mode on page 4-1.)
Appendix A