Brother MFC-7225N - Changing the Memory Security Password; Setting up the Password

Chapter 2
2 - 10
Setting up the password
Note
■
If you have already set the password and
want to change it, please see Changing
the Memory Security password below.
■
If you forget the Memory Security
password, please call your Brother dealer
for service.
1
Press Menu/Set, 1, 8, 1.
2
Enter a four-digit number for the
password.
Press Menu/Set.
If you are entering the password for the
first time, the LCD shows
Verify
.
3
Re-enter the password.
Press Menu/Set.
4
Press Stop/Exit.
Changing the Memory Security
password
1
Press Menu/Set, 1, 8, 1.
2
Press
▲
or
▼
to select
Set Password
.
Press Menu/Set.
3
Enter the registered four-digit password.
Press Menu/Set.
4
Enter a four-digit number for the new
password.
Press Menu/Set.
5
If the LCD shows
Verify
, re-enter the
new password.
Press Menu/Set.
6
Press Stop/Exit.
1.Mem Security
1.Mem Security