Brother MFC-7225N - Chapter 3 Setup Send; Fax Dialling and Sending Methods

3 - 1
3
3
How to enter Fax mode
Before sending faxes or changing fax send or
receiving settings, make sure (Fax) is
illuminated in green. If it is not, press
(Fax) to enter Fax mode. The default setting
is Fax mode.
How to dial
You can dial in any of the following ways.
Manual dialling
Press all of the digits of the phone or fax
number.
One-Touch Dialling
Press the One-Touch key of the location you
want to call. (See Storing One-Touch
numbers on page 5-1.)
Note
■
FAX-2820 and FAX-2920 only:
To dial One-Touch numbers 11 to 20, hold
down Shift as you press the One-Touch
key.
■
Shift is not available for MFC-7225N.
Setup Send
MFC-7225NFAX-2820 and
FAX-2920