Brother MFC-7225N - Setting the Paper Type; Setting the Paper Size

Getting started
2 - 5
2
Setting the Paper Type
To get the best print quality, set the machine
for the type of paper you are using.
1
Press Menu/Set, 1, 2.
2
Press
▲
or
▼
to select
Plain
,
Thin
,
Thick
,
Thicker
,
Transprncy
(Transparency) or
Recycled
(Recycled
paper).
Press Menu/Set.
3
Press Stop/Exit.
Note
■
The machine ejects paper with printed
surfaces face down onto the output paper
tray in the front of the machine. When you
use transparencies or labels, remove
each sheet immediately to prevent
smudging or paper jams.
■
You can select
Transprncy
in Step 2 if
Letter
or
A4
paper size has been
selected (Menu/Set, 1, 3).
Setting the Paper Size
You can use seven sizes of paper for printing
copies: Letter, A4, B5, A5, B6, A6 and
Executive and two sizes for printing faxes:
Letter and A4. When you change the size of
paper you load in the paper tray, you will need
to change the paper size setting at the same
time so your machine can fit an incoming fax
or a reduced copy on the page.
Note
If you selected
Transprncy
as the paper
type (Menu/Set, 1, 2) you will only be able to
select
Letter
or
A4
size paper in Step 2.
1
Press Menu/Set, 1, 3.
2
Press
▲
or
▼
to select
Letter
,
A4
,
A5
,
A6
,
B5
,
B6
or
Executive
.
Press Menu/Set.
3
Press Stop/Exit.
2.Paper Type
3.Paper Size