What does 'Scan Unable XX' mean on Brother Fax Machine?
The Brother Fax Machine has a mechanical problem. Turn the power switch off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on.
What does 'Toner Ended' mean on my Brother MFC-7290 All in One Printer?
If your Brother All in One Printer displays 'Toner Ended', it is time to replace the toner cartridge with a new one. Faxes will be stored in the memory while memory is available.
What does 'Drum Stop' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Drum Stop', it indicates that it is time to replace the drum unit.
What to do if my Brother Fax Machine says 'No Paper'?
The Brother Fax Machine might be out of paper, or the paper isn't loaded correctly in the tray. Refill the paper, or remove and reload it, then press Start. If that doesn't work, the paper pick-up roller may need cleaning.
How to fix 'Cartridge Error' on Brother Fax Machine?
The toner cartridge might not be installed properly in your Brother Fax Machine. Pull out the drum unit, remove the toner cartridge, and then re-install it into the drum unit.
What does 'DR Mode in Use' mean on Brother Fax Machine?
The Brother Fax Machine is set to Distinctive Ring mode. Set Distinctive Ring to Off.
How to fix 'Size mismatch' error on Brother Fax Machine?
The paper in the tray of your Brother Fax Machine is not a correct size. Load an appropriate size of paper in the tray, and re-set the “Paper Size”.
What does 'Toner Low' mean on my Brother Fax Machine?
If the LCD shows Toner Low you can still print; however, the Brother Fax Machine is telling you that the toner cartridge is near the end of its life. Order a new toner cartridge now so a replacement will be available when the LCD shows Replace Toner or Toner Ended.
What does 'Cooling Down Wait for a while' mean on my Brother Fax Machine?
The drum unit or toner cartridge in your Brother Fax Machine is too hot. Make sure the fan is spinning and the exhaust isn't blocked. If the fan works, clear any obstacles around the exhaust and let the machine sit for several minutes. If the fan doesn't work, turn the power off and on, then let the machine sit for 15 minutes.
What to do if Brother Fax Machine says 'Out of Memory'?
The Brother Fax Machine's memory is full. If you are faxing or copying, you can press Start to continue or Stop/Exit to wait for other operations to finish. Alternatively, clear faxes from the memory by printing them and consider turning off Fax Storage.
General| Product Type | All-in-One Printer |
|---|---|
| Print Technology | Laser |
| Functionality | Print, Copy, Scan, Fax |
| Functions | Print, Copy, Scan, Fax |
| Print Speed (Black) | 20 ppm |
| Max. black print speed | 20 ppm |
| Print Resolution | 2400 x 600 dpi |
| Print Resolution (Black) | 2400 x 600 dpi |
| Connectivity | USB 2.0 |
| PC Connectivity | USB 2.0 |
| Paper Capacity | 250 sheets |
| Standard paper input | 250 sheets |
| Automatic Document Feeder | Yes |
| Automatic document feeder capacity | 35 sheets |
| Automatic Document Feeder (ADF) | 35 sheets |
| Duplex Printing | Manual |
| Fax Transmission Speed | 33.6 Kbps |
| Display | 2-Line LCD |
| Monthly Duty Cycle | Up to 10, 000 pages |
| Scanner Resolution | 600 x 1200 dpi |
| Media Types | Plain Paper |
| Supported Media Sizes | A4, Letter, A5, Executive |
To Next Page