Brother MFC-7290 - LAN Connection Status Display (Function Code: 33)

5-18
Confidential
1.3.11 LAN connection status display (Function code: 33)
<Function>
This function is used to check the connection status of the wired LAN. The display items are
shown in the table below.
<Operating Procedure>
(1) Press the [3] button twice in the initial state of the maintenance mode.
The wired LAN connection status as shown in the table above is displayed on the LCD.
(2) When the [Stop/Exit] button is pressed, the operation is canceled, and the machine
returns to the initial state of the maintenance mode.
LCD LAN connection status
Active 100B-FD 100BASE-T Full Duplex
Active 100B-HD 100BASE-T Half Duplex
Active 10B-FD 10BASE-T Full Duplex
Active 10B-HD 10BASE-T Half Duplex
Inactive Not connected.