3-78
Confidential
(4) Release the hook to remove the eject sensor PCB ASSY from the pin of the main frame
L ASSY.
(5) Release the harness of the eject sensor PCB ASSY from the guides of the main frame L
ASSY.
(6) Release the two hooks to remove the back cover sensor.
Fig. 3-68
Harness routing : Refer to "5. Eject sensor PCB ASSY".
Assembling Note :
• When assembling the back cover sensor, attach it while pushing the center of the rear
side of the back cover sensor.
Eject sensor PCB ASSY
Pin
Hook
Main frame L ASSY
Back cover sensor
Hook
Hook
Guides
Harness
To Next Page
Loading...
