App. 4-1
Confidential
APPENDIX 4
HOW TO MAKE PROTECTIVE MATERIAL FOR DRUM UNIT
Follow the procedure below to make the protective material for the drum unit, and use it
when packing the machine.
<Procedures>
(1) Pass the paper strip through the hole on the protective material with the white surface
of paper facing down.
(2) Pass the tip of the paper strip through the hole on the paper strip, and then pull the tip
in the direction of the arrow.
Fig. APP. 4-1
Protective material Paper strip
Paper strip
Protective
material
Protective
material
Protective
material
To Previous Page
Loading...
