Brother MFC-7290 - Page 55

2-18
Confidential
Error
codes
Problem
Refer
to
Error
codes
Problem
Refer
to
D6 An unidentified error occurred. 2-54 EB An unidentified error occurred. 2-57
D7 An unidentified error occurred. 2-54 EC Detected a main fan failure. 2-57
D8 An unidentified error occurred. 2-54 ED An unidentified error occurred. 2-58
D9 An unidentified error occurred. 2-54 EE An unidentified error occurred. 2-58
DA An unidentified error occurred. 2-54 EF
Unstable power supply was
detected.
2-58
DB An unidentified error occurred. 2-54 F0
Malfunction of the flash memory
on the main PCB
2-58
DC An unidentified error occurred. 2-54 F1 An unidentified error occurred. 2-59
DD
Fuser unit error (except error
codes 6A to 6E, 76, 78, DE and
E2)
2-54
F2 An unidentified error occurred. 2-59
DE
When the center thermistor of
the fuser unit is higher than the
idle temperature, the side
thermistor detected a
temperature lower than the
specified temperature.
2-55
F3 An unidentified error occurred. 2-59
DF An unidentified error occurred. 2-55 F4 An unidentified error occurred. 2-59
E0
An error occurred in the ROM
check sum.
2-55
F5 An unidentified error occurred. 2-59
E1 Software bug 2-56
F6 An unidentified error occurred. 2-59
E2
When the center thermistor of
the fuser unit is higher than the
idle temperature, the side
thermistor detected a
temperature higher than the
specified temperature.
2-56
F8 An unidentified error occurred. 2-59
E3 An unidentified error occurred. 2-56 F9
The country code was not
entered properly.
2-59
E4 An unidentified error occurred. 2-56 FA An unidentified error occurred. 2-59
E6
Write error in the EEPROM of
the main PCB
2-57
FB An unidentified error occurred. 2-59
E7 An unidentified error occurred. 2-57 FC An unidentified error occurred. 2-59
E8 An unidentified error occurred. 2-57 FD An unidentified error occurred. 2-59
E9 An unidentified error occurred. 2-57 FE An unidentified error occurred. 2-59
EA An unidentified error occurred. 2-57 FF An unidentified error occurred. 2-59