Menu and features
117
C
Entering text C
When setting certain menu selections, such as the Station ID, you will need to type text
characters. The dial pad keys have letters printed on them. The keys: 0, # and l do not have
printed letters because they are used for special characters.
Press the appropriate dial pad key the number of times shown in this reference table to access
the character you want.
Inserting spaces
To enter a space in a fax number, press c once between numbers. To enter a space in a name,
press c once for a Chinese character or twice for an alphabetical character between letters.
Making corrections
If you entered a character incorrectly and want to change it, press d or c to move the cursor to the
incorrect character, and then press Clear.
Repeating letters
To enter a letter on the same key as the previous letter, press c to move the cursor right before
pressing the key again.
Special characters and symbols
Press l, # or 0 repeatedly until the LCD shows the symbol or character you want. The symbols
and characters below will appear depending on your menu selection.
Conversion and Enter Characters
You can register your name in Chinese or English in this machine, you can switch between the
alphabet input mode and the Chinese-entry mode by pressing a button, the current input mode
will appear in the lower right corner of LCD. Simplified Chinese can be converted from Pinyin
entry.
For example, if you want to enter “Good 公司 ”, follow the below procedures:
Press
Key
one
time
two
times
three
times
four
times
five
times
six
times
seven
times
eight
times
nine
times
2 abcABC2ab
3 de fDEF3de
4 gh iGHI 4gh
5 jklJKL5jk
6 mn oMNO6mn
7 pqr sPQRS7
8 tuvTUV8tu
9 wxyzWXYZ9
Press l for (space) ! “ # $ % & ’ ( ) l + , - . / m
Press # for : ; < = > ? @ [ ] ^ _
Press 0 for Ä Ë Ö Ü À Ç È É 0
To Next Page
Loading...
