112
Setting dial tone detection B
When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial
as soon as it detects a dial tone. This setting
can save a small amount of time when
sending a fax to many different numbers. If
you change the setting and start having
problems with dialling you should change
back to the default No Detection setting.
a (for New Zealand) Press Menu, 0, 4.
Press Menu, 0, 5.
b Press a or b to choose Detection or
No Detection.
Press OK.
c Press Stop/Exit.
Curled
Choose Reduce Paper Curl mode in the printer driver when you do
not use our recommended paper. (See Device Options (For
Windows
®
) or Print Settings (For Macintosh
®
) in the Software User's
Guide on the CD-ROM.)
Turn the paper over in the paper tray, and print again. (Excluding
Letterhead paper)
Lift up the output tray support flap.
Replace the paper in the paper tray with paper from a freshly opened
ream.
Make sure you are using paper that is recommended for your
machine. (See Acceptable paper and other print media on page 14.)
Examples of poor print
quality
Recommendation
To Next Page
Loading...
