Brother MFC-7440N - Wireless One-Push Configuration

Specifications
173
D
Wireless one-push configuration D
If your wireless access point supports either SecureEasySetup™, Wi-Fi Protected Setup™
(PBC
1
) or AOSS™, you can configure the machine easily without a computer. By pushing a
button on the wireless LAN router / access point and using the menu on the machine, you can set
up the wireless network and security settings. See the user’s guide for your wireless LAN router /
access point for instructions on how to access one-push mode.
1
Push Button Configuration
Note
Routers or access points that support SecureEasySetup™, Wi-Fi Protected Setup™ or
AOSS™ have the symbols shown below.