Brother MFC-760 - Copy Brightness; Copy Contrast; Selecting a Single Colour (One Colour)

92
CHAPTER ELEVEN
Copy Brightness
You can choose the brightness setting before making a copy.
1
Press Menu, 3, 4.
2
Press to make a darker copy.
—OR—
Press
to make a lighter copy.
3
Press Set when the screen displays your setting.
Press Stop to exit.
Copy Contrast
You can choose the contrast setting for a copy. Greater contrast can help
an image look sharper and more vivid. This feature is available only for
colour copying.
1
Press Menu, 3, 5.
2
Press to decrease contrast
—OR—
Press
to increase contrast.
3
When the screen displays your setting, press Set.
4
Press Stop to exit.
Selecting a Single Colour (One Colour)
For black and white originals, you can select a single colour, instead of
black, as the default to be used when you press Mono Copy. OFF is the
setting for Black.
1
Press Menu, 3, 6.
2
Press or to select a copy colour: The options are OFF, RED,
GREEN, BLUE, CYAN, MAGENTA, and YELLOW.
3
When the screen displays your selection, press Set.
4
Press Stop to exit.