Brother MFC-760 - Using the MFC-760 Maintenance Utility for DOS

27
MFC SETUP AND CONNECTIONS
5
Type CD DOS\INKJET and press Enter.
X:\>CD DOS\INKJET
6
Type DOSETUP.EXE and press Enter.
X:\DOS\INKJET>DOSETUP.EXE
7
Follow the instructions from the installer.
Using the MFC-760 Maintenance Utility for
DOS
1
Select the directory you have chosen when you installed the program
by typing the floppy disk directory name.
C:\>CD directory name
2
Type MFC71DOS and press the Enter key.
C:\directory name>MFC71DOS
The main screen will appear on your computer screen.
NOTE: ■ Make sure that you select the correct paper size in this utility
program before printing. Paper alignment is not compatible
with Epson printers, you cannot get the correct print output
unless you set the paper size in this utility.
■ Do not use this program from a DOS window running under
Windows.