Brother MFC-760 - Changing Remote Codes; To Change Remote Codes; Printing a Fax from Memory

61
SETUP RECEIVE
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset
Activation Code is
5 1.
If you are always disconnected when accessing your external TAD
remotely, try changing the Activation Code from
5 1 to # # #.
To change Remote Codes
1
Press Menu, 1, 2, 4.
2
Press or to select ON (or OFF).
REMOTE ACT.:ON
3
Press Set when the screen displays the setting you want.
4
Enter a new Remote Activation Code, then press Set.
ACT.CODE:*51
5
Press Stop to exit.
Printing a Fax from Memory
If you have fax storage ON for remote retrieval, you can still print a fax
from the machine’s memory when you are at your machine:
1
Press Menu, 1, 7, 4.
2
Press Start.
3
After all the data saved in the memory is printed out. Press Stop.
See
“Setting Fax
Storage”
chap. 9