Brother MFC-760 - Using Remote Access Code

147
Using Remote Access Code
1
Dial your machine phone number from a
touch tone phone.
2
Enter your Remote Control Access Code
(159 ) after the beep.
3
Your machine signals the kinds of messages
received:
1 long beep — Fax message(s)
No beeps — no messages
4
After 2 short beeps, enter a command.
5
Press 9 0 to reset your machine when you
finish.
6
Hang up.
4
Change Answer Mode
Press 9 8
then for EXT.TEL/TAD, press 1.
Fax, press 2.
Exit Remote Operation
Press 9 0.
Change Remote Access Code
1
Press Menu, 1, 7, 3.
2
Enter the 3-digit number. The cannot be
used.
3
Press Set.
4
Press Stop to exit.
1
REMOTE CONTROL ACCESS CARD