Brother MFC-845CW - Choosing a Receive Mode; Setting up the Message Center

Setting Up the Machine
14
STEP1
16 Choosing a Receive Mode
There are three possible receive modes: Fax Only,
Fax/Tel and Manual.
1 Press Menu.
2 Press a or b to choose Initial Setup.
Press OK.
3 Press a or b to choose Receive Mode.
Press OK.
4 Press a or b to choose the mode.
Press OK.
5 Press Stop/Exit.
For details, see Using receive modes in
Chapter 6 of the User's Guide.
17 Setting up the Message
Center
You must record an outgoing message in order to use
the Message Center mode.
1 Record the Message Center outgoing
message (Msg Ctr OGM).
See Outgoing Message (OGM) in Chapter 9
of the User’s Guide.
2 Activate Message Center mode.
Press . The button will light when the mode
is active.
If the Message Center Mode is on, it
overrides your Receive Mode setting. The
built-in digital Message Center answers
voice calls. If the call is a fax, you can receive
a fax automatically.
For details, see Message Center (MFC-
665CW and MFC-845CW only) in Chapter 9
of the User’s Guide.