For Network Users
50
BRAdmin Light configuration utility
(For Mac OS
®
X users)
The Brother BRAdmin Light software is a Java™ application that is designed for the Apple Mac OS
®
X
environment. It supports some of the features of the Windows BRAdmin Professional software. For example, using
the BRAdmin Light software, you can change some network settings on Brother’s network ready printers and
multifunction devices.
The BRAdmin Light software will be installed automatically when you install the MFL-Pro Suite. Please refer to
installing the driver and software in this Quick Setup Guide if you have not yet installed the MFL-Pro Suite.
For more information on BRAdmin Light, visit us at http://solutions.brother.com
.
Setting your IP address, Subnet Mask and
Gateway using BRAdmin Light
Note
If you have a DHCP/BOOTP/RARP server in your
network, you don’t have to do the following
operation. The print server will automatically
obtain its own IP address. Make sure that version
1.4.1_07 or later of Java™ client software is
installed on your computer.
1 Double-click the Macintosh HD icon on your
desktop.
2 Choose Library, Printers, Brother and then
Utilities.
3 Double-click the BRAdmin Light.jar file. Run
the BRAdmin Light software. BRAdmin Light
searches for new devices automatically.
4 Double-click the new device.
5 Enter the IP Address, Subnet Mask and
Gateway, and then click OK.
6 The address information will be saved to the
machine.
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
To Next Page
Loading...
Need help?
General
