Chapter 2
14
d Put paper, labels or envelopes in the MP
tray. Make sure:
The number of envelopes in the MP
tray does not exceed 3.
The paper, labels or envelopes stay
under the maximum paper mark (1).
The side to be printed on must be
face up.
e Send the print data to the machine.
• Remove each printed envelope
immediately to prevent a paper jam.
• If your thick paper curls during printing, put
only one sheet at a time in the MP tray and
open the back cover (face-up output tray)
to let the printed pages exit to the face-up
output tray.
f Close the back cover (face-up output
tray).
1
To Next Page
Loading...
Need help?
General
