Brother MFC-8680DN User Manual

Web Based Management
149
11
c Click FTP/Network Scan Profile on Administrator Settings page.
Now you can configure and change the following Scan to FTP settings using a web browser.
 Profile Name (Up to 15 characters)
 Host Address (FTP server address)
 Username
 Password
 Store Directory
 File Name
 Quality
 File Type
 Passive Mode
 Port Number
You can set Passive Mode to OFF or ON depending on your FTP server and network firewall configuration.
By default this setting is OFF, you can also change the port number used to access the FTP server. The
default for this setting is port 21. In most cases these two settings can remain as default.
Note
Scan to FTP is available when FTP server profiles are configured using Web Based Management.

Brother MFC-8680DN Specifications

General

Brand	Brother
Model	MFC-8680DN
Category	All in One Printer
Language	English