Brother MFC-8680DN - Step by Step Chart for Wireless Network Configuration; For Infrastructure Mode

Configuring your machine for a wireless network (For MFC-8890DW)
25
3
Step by step chart for wireless network configuration 3
For Infrastructure mode 3
a Confirm your network environment. See page 27.
b Confirm your wireless network setup method. See page 28.
c Configure your machine for a wireless network. See page 31.
Wireless configuration and installing drivers and software have been completed.
 Infrastructure mode
Connected to a computer with an access point
or
 Ad-hoc mode See page 26
Connected to a wireless capable computer
without an access point
Using the Setup
Wizard from the
control panel
(Recommended)
Using the
SES/WPS/AOSS™
control panel
menu
(Automatic
Wireless mode)
Using the PIN
Method of Wi-Fi
Protected Setup
Using the Brother
installer
application
Temporarily using
a network cable
Using the
SES/WPS/AOSS™
control panel
menu
(Automatic
Wireless mode)
See page 31 See page 36 See page 39
(Windows
®
)
See page 41
(Macintosh)
See page 68
(Windows
®
)
See page 51
(Macintosh)
See page 78
Installing drivers and software (See the Quick Setup Guide)