Brother MFC-8880DN - Out of Memory Message

Sending a fax
47
5
Out of memory message 5
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Start to send the
pages scanned so far, or to press Stop/Exit
to cancel the operation.
Note
• If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real Time Transmission on page 45.)
• To make extra memory available, you can
do the following:
• Print the faxes that are in the memory.
(See Printing a fax from the memory
on page 53.)
• Turn off Fax storage. (See Turning off
Remote Fax Options on page 76.)
• Add Optional Memory (See Memory
board on page 121.)