Brother MFC-8880DN - Setting up Groups for Broadcasting

Chapter 8
70
f Follow the directions beginning in
step d in Storing One-Touch dial
numbers and Storing Speed-Dial
numbers. (See Storing One Touch Dial
numbers on page 67 and Storing
Speed Dial numbers on page 68.)
Setting up Groups for
Broadcasting 8
If you often want to send the same fax
message to many fax numbers you can set
up a group.
Groups are stored on a One Touch key or a
Speed Dial number. Each group uses up a
One Touch key or a Speed Dial location. You
can then send the fax message to all the
numbers stored in a group just by pressing a
One Touch key or entering a Speed Dial
number, and then pressing Start.
Before you can add numbers to a group, you
need to store them as One Touch or
Speed Dial numbers. You can have up to 20
small groups, or you can assign up to 339
numbers to one large group.
a Press Menu, 2, 3, 3.
b Choose an empty location where you
want to store the group in one of the
following ways:
 Press a One Touch key.
 Hold down Shift as you press
Search/Speed Dial and then enter
the three-digit Speed Dial location.
Press OK.
Note
Please choose a One Touch key or a
Speed Dial number that has not been
used to store a number.
c Use the dial pad to enter a group
number (01 to 20).
Press OK.
d Press a or b to select Fax/IFAX or
E-Mail.
Press OK.