Brother MFC-8890DW - Adjusting Contrast and Brightness

Making copies
89
12
Adjusting Contrast and
Brightness 12
Contrast 12
Adjust the contrast to help an image look
sharper and more vivid.
To temporarily change the contrast setting,
follow the steps below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Contrast/Quality.
Press a or b to choose Contrast.
Press OK.
Contrast:-nnonn+c
Quality :Auto
Enlg/Red:100%
Tray :MP>T1
Select dc&OK
01
e Press d or c to increase or decrease the
contrast.
Press OK.
f Press Start.
To change the default setting follow the steps
below:
a Press Menu, 3, 4.
b Press d or c to increase or decrease the
contrast.
Press OK.
c Press Stop/Exit.
Brightness 12
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy brightness
setting, follow the steps below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press a or b to choose Bright.
Quality :Auto
Enlg/Red:100%
Tray :MP>T1
Bright :-nnonn+c
Select dc&OK
01
e Press c to make a lighter copy or press
d to make a darker copy.
Press OK.
f Press Start.
To change the default setting follow the steps
below:
a Press Menu, 3, 3.
b Press c to make a lighter copy or press
d to make a darker copy.
Press OK.
c Press Stop/Exit.