Brother MFC-8950DW - Search; LDAP Search; Fax Redial

Dialling and storing numbers
45
8
Search 8
You can search alphabetically for names you
have stored in the One Touch and Speed Dial
memories. (See Storing One Touch Dial
numbers uu page 48 and Storing Speed Dial
numbers uu page 50.)
a Press (Address Book).
b Press (Search) on the
Touchscreen.
c Press the first few letters of the name on
the Touchscreen.
Press OK.
d Press a or b to scroll until you find the
name you are looking for.
Press the name you are looking for.
e Press Send a fax or
Send a E-mail.
f Press Start.
Note
• If the LCD shows
Results cannot be found.. when
you enter the first few letters of the name,
it means that a name for the letter is not
stored.
• One Touch Dial number and Speed Dial
numbers stored without the name cannot
be retrieved by the Search function.
LDAP search 8
If the machine is connected to your LDAP
server, you can search for information such
as fax numbers and E-mail addresses from
your server. (See How to set up LDAP
uu Network User’s Guide)
Fax redial 8
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.
Redial/Pause only works if you dialled from
the control panel.