Brother MFC-8950DW - Enlarging or Reducing the Image Copied

Making copies
53
7
Enlarging or reducing the
image copied 7
To enlarge or reduce the next copy follow the
instructions below:
a Press Copy.
b Load your document.
c Enter the number of copies you want.
d Press d or c to display
Enlarge/ Reduce.
Press Enlarge/ Reduce.
e Press 100%, Enlarge, Reduce, Auto
or Custom (25-400%).
f Do one of the following:
 If you chose Enlarge or Reduce,
press the enlargement or reduction
ratio button you want.
 If you chose Custom (25-400%),
enter an enlargement or reduction
ratio from 25% to 400%.
Press OK.
 If you chose 100% or Auto
1
, go to
step g.
*
The factory setting is shown in Bold
with an asterisk.
1
Auto sets the machine to calculate the
reduction ratio that best fits the size of paper.
Auto is only available when using the ADF.
g If you do not want to change additional
settings, press Start.
Note
Page Layout Options 2in1(P),
2in1(L), 2in1(ID), 4in1(P) and
4in1(L) are not available with
Enlarge/Reduce.
100%*
104% EXE  LTR
141% A5  A4
200%
50%
70% A4  A5
78% LGL  LTR
83% LGL  A4
85% LTR  EXE
91%FullPage
94% A4  LTR
97% LTR  A4
Auto
1
Custom (25-400%)