Brother MFC-8950DW - Tray Selection

Making copies
55
7
a Press Copy.
b Load your document.
c Enter the number of copies you want.
d Press d or c to display Duplex Copy.
Press Duplex Copy.
e Press d or c to display the following
layout options:
2side2side,
1side2side LongEdgeFlip,
2side1side LongEdgeFlip,
1side2side ShortEdgeFlip,
2side1side ShortEdgeFlip,
Off
Press the option you want.
f If you do not want to change additional
settings, press Start.
Tray selection 7
You can change the Tray Use option for the
next copy.
a Press Copy.
b Load your document.
c Enter the number of copies you want.
d Press d or c to display Tray Use.
Press Tray Use.
e Press MP>T1, MP>T1>T2
1
, T1>MP,
T1>T2>MP
1
, Tray#1 Only,
Tray#2 Only
1
or MP Only.
1
T2 and Tray#2 Only appears only if Tray 2
is installed.
f If you do not want to change additional
settings, press Start.
Note
To change the default setting for Tray Use
uu Basic User's Guide: Tray Use in Copy
mode