EasyManuals Logo

Brother MFC-8950DW Network User's Guide

Brother MFC-8950DW
187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
51
Control panel setup
4
IP Address 4
This field displays the current IP address of the machine. If you have chosen a Boot Method of Static,
enter the IP address that you wish to assign to the machine (check with your network administrator for the IP
address to use). If you have chosen a method other than Static, the machine will attempt to determine its
IP address using the DHCP or BOOTP protocols. The default IP address of your machine will probably be
incompatible with the IP address numbering scheme of your network. We recommend that you contact your
network administrator for an IP address for the network the unit will be connected on.
Subnet Mask 4
This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to
obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet
mask to use.
Gateway 4
This field displays the current gateway or router address used by the machine. If you are not using DHCP or
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a
gateway or router, leave this field blank. Check with your network administrator if you are unsure.
Node Name 4
You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will
be the name that is registered by the WINS server on your network. Brother recommends the name
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx for a wireless network. (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address.)
WINS Config 4
This selection controls how the machine obtains the IP address of the WINS server.
Auto 4
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto for this feature to work.
Static
4
Uses a specified IP address for the primary and secondary WINS servers.
WINS Server 4
Primary WINS Server IP Address 4
This field specifies the IP address of the primary WINS (Windows
®
Internet Name Service) server. If set to a
non-zero value, the machine will contact this server to register its name with the Windows
®
Internet Name
Service.

Table of Contents

Other manuals for Brother MFC-8950DW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-8950DW and is the answer not in the manual?

Brother MFC-8950DW Specifications

General IconGeneral
Typeall in one
Colorblack
Tray Capacity500
Automatic Document Feeder Capacity50 sheets
Paper Sizeletter, legal, executive, a4, a5, a6, b5, b6, custom sizes from 3" x 5" to 8.5" x 14"
Paper Handlingup to 500 sheets
Mono Print Speed42 pages per minute
Print Resolution Monoup to 1200 x 1200
Maximum Number of Pages Per Monthup to 100, 000
Scanner Typeflatbed
Scan Resolutionup to 19200 x 19200
Fax Functionyes
Cartridgestn-720, tn-750, tn-780, dr-720
Number Of Cartridges2
Internal Memoryyes
Networkwired, wireless
Connectivityusb 2.0
OS Compatibilitywindows or mac os
Mobile Devices Connectionyes
Weight and Dimensions IconWeight and Dimensions
Height19.3 inches
Width16.3 inches
Net Weight39 pounds

Related product manuals