2
2
When you choose Scan to Network, you can scan documents directly to a shared folder on a CIFS server
located on your local network or the internet. The Scan to Network feature supports Kerberos and NTLMv2
authentication.
The details required to use Scan to Network can be entered by using Web Based Management to
pre-configure and store the details in a Scan to Network profile. The Scan to Network profile stores user
information and configuration settings for use on a network, or the internet.
• You must configure the SNTP protocol (network time server), or you must set the date, time and time zone
correctly for Authentication. For more information, see Synchronize with SNTP server uu page 6.
• We recommend to use Windows
®
Internet Explorer
®
7.0/8.0 or Firefox
®
3.6 for Windows
®
and Safari
4.0/5.0 for Macintosh. Please also make sure that JavaScript and Cookies are always enabled in
whichever browser you use. If a different web browser is used, make sure it is compatible with HTTP 1.0
and HTTP 1.1.
Adding the Scan to Network file name 2
a Start your web browser.
b Type “http://machine’s IP address/” into your browser's address bar (where “machine’s IP address” is the
IP address of the machine or the print server name).
For example: http://192.168.1.2/
c No password is required by default. If you have previously set a password, enter it and press .
d Click Scan.
e Click Scan to FTP/Network.
Configuration for Scan to Network using a
Web Browser
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
